Specification:
Flight Controller
Brand name: MATEKSYS
MCU: 100MHz STM32F411CEU6
IMU: MPU6000 (SPI)
Baro: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: No
2x Uarts
2x Softserial-Tx
6x PWM outputs (Dshot/Proshot/oneshot/multishot)
1x I2C
3x ADC (VBAT, Current, RSSI)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
TR/SA VTX control: Yes
Camera control: Yes
WS2812 Led control : Yes
Beeper output: Yes
RSSI: Yes
Filtered Vbat output power for VTX, Switchable via AUX (modes tab-user1)
Convertible 20mm to 30.5mm mounting
Power
Input: 6~36V (2~8S LiPo)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
Battery Voltage Sensor: 1:10 (Scale 110)
No Current Sensor built-in, supports external current sensor of PDB/4in1
FC Firmware
INAV Target: MATEKF411SE
BF unified Target: MATEKF411SE(MTKS)
Physical
Mounting
20 x 20mm/Φ3mm with Silicon Grommets
20 x 20mm/Φ2mm with Silicon & Brass Grommets
30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
Dimensions: 28 x 28 mm
Weight: 5g
Including
1x F411-miniSE
1x 20mm to 30.5mm conversion plate
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm
2x SH1.0_8pin connectors