Using manufacturer’s default configuration and the recommended FPV gear, it is 100% under 250 grams.
To the untrained eye, she will look like a harmless toy but, -we and you know- this is a super capable FPV ship that will even let you do long range like the bigger sisters. Being so light, it’s a blessing for beginners since they will find that is really hard to break it. Also, coupled with NEW Kopilot Lite and the VC400 camera, you will get a ready to go FPV system, solder and hassle free.
Now you can enjoy more than 30 minutes FPV action (with a 18650 2S1P 3500mAh) or a super thrilling proximity mission (on 3S setup), everything under 250 grams. Since the wingspan is only 570mm, you don’t even need to think about the portability, this thing is bicycle-ready!
Forget about those sketchy DIY projects, and spend your time flying a fantastic wing that will perform like a much bigger plane, without the worries of being pointed as a criminal.
Description of Dart 250G:
Brand Name: ZOHD KIT
Item Name: Dart 250G
Material: High-Quality EPP
Wingspan: 570mm (22.44»)
Length: 379mm (14.92in»)
Recommanded Devices (not included in KIT version)
Motor: 1406-2600KV
ESC: 30A w/5V 2A BEC Click Here
Servos: 9g Click Here
Propeller: 2 blade 5×5 Click Here 3 blade 3x5x3 Click Here
Recommended Battery: (not included in any version)
Lipo 2S 3S 900-1500mAh Click Here
Li-Ion 18650 2S1P 3500mAh
Features:
- AUW is less than 250g, ideal to comply with Sub250g regulations
- Durable EPP material, built-in CF spar for enhancement, crash resistant
- Being light-weight will be safe to fly anywhere, anytime. You’re avoiding the hassle of an
FPV registration - Glue-free assembly, the main wing and tails come with pre-applied adhesive tape, just peel
it off and install them - Large battery bay for extended flight time
- Nose camera bay compatible with all FPV and AIO cameras in the market
- Cover for the fuselage bottom, super durable, protecting the fuselage bottom from
scratches - Servo arms are well protected by an EPP hump
- Built-in CF rod in the ailerons will give precision and sharp action to your inputs
- Dedicated equipment bay for Flight Controller and GPS
- Main wing leading edge cover for those unexpected impacts
- Textured areas on both side of the fuselage, for more secure hand launch grip
- Optimized air-cooling design will keep your gear safe from overheating
Specifications of ZOHD VC400 PIGGYBACK AIO NTSC FPV Camera w/ OSD 400mW 5.8G 40CH VTX 600TVL 120 FOV ultra-light Racing Camera:
- Input voltage: 7-28V
- Frequency band: 5.8GHZ
- Video format: NTSC
- Camera resolution: 600TVL
- Antenna connector: Clover / Dipole
- Field of View: 120 degrees
- Size: 241510mm
- Weight: 8g
- Output power: 0.1mW / 25mW / 200mW / 400mW
- Operating current: 90mA (0.1mW) 150mA (25mW) 270mA (200mW) 360mA (400mW)
Features: - 3-in-1 AIO integrated design, with camera, VTx and antenna, ultra-light weight and small
size, best solution for light-weight airplanes. - With OSD to show Power-on time and Input Voltage, so you can know how long you can
keep flying. - Default JST plug and up to 25cm power cable, longer enough for most small size airplanes.
- Up to 2.5km video transmission range on 400mW.
- Wide voltage input from 7-28V, safe for all kinds of battery or BEC input.
- With customized strap to hold the camera and EVA foam for anti-vibration.
- Switchable between 0.1mW / 25mW / 200mW / 400mW.
- Optional Clover / Dipole antenna for different airframes and flight mode (for straight line
flights or flying around). - 5.8Ghz VTx with 40 racing channels.
- Allows you to display customized Call Signs.
- Power cable were soldering and fixed by silica glue, solid even in a crash.
Specifications of ZOHD Kopilot Lite Autopilot System Flight Controller with GPS Module Return Home Stabilization Gyro for RC Airplanes Fixed Wing FPV Model
- Supported planes: T-Tail, V-tail, Flying Wing / d elta Wing.
- Supported Receiver: PWM, PPM, S-Bus.
- Supported mode: Home (RTH), Fence (RAD), Stabilization modes.
- Servo connector: 4 connectors
- Operating Temperature: -10℃ — 50℃
- Weight: 8g.
Features: - Easy Installation, minimal wiring. Super easy setup.
- Powerful stabilization and RTH algorithm.
- Return to Home (RTH) Fence (RAD) and Stabilization modes on a 3-position switch.
- Supports T-Tail, V-tail and Flying Wing / d elta configurations.
- Mini-size GPS unit for ultra-light setups.
- Fast SAT lock.
- Adjustment board removable for a light-weight setup.
- Launch assistant and motor blocking for no SAT fix.
- AIL, ELE, THR, RUD + AUX to control your servos. Landing gear and flaps go straight to RX.
- Computer-free programming.
- Easy to transfer between planes
- Completely transparent. Switch it off and use it as a mixing board only.
User manual : click here
Introduce about FPV READY version : Dart 250G plane PNP with ZOHD Kopilot Lite Flight Controller and ZOHD VC400 All-in-One Video Camera.
Package Included
KIT Includes:
1 x Dart 250G plane KIT with EPP foam and all hardware.
PNP Includes:
1 x Dart 250G plane PNP with pre-installed motor, esc, servos, propeller, hardware.
FPV Version Includes:
1 x Dart 250G plane PNP with pre-installed motor, esc, servos, propeller, hardware + ZOHD Kopilot Lite + ZOHD VC400 All-in-One Video Camera Combo
VC400 CAMERA Package
1 x VC400 AIO Camera with lens cover
1 x Manual
1 x Customized strap
2 x EVA anti-vibration foam
ZOHD Kopilot Lite Package
1 x Kopilot Lite main board
2 x Mounting support
1 x GPS
1 x Adjustment board
1 x Double side tape
1 x Screw driver