iFlight Nazgul5 V2 240mm 5 Inch 4S / 6S Freestyle FPV Racing Drone BNF/PNP Caddx Ratel Cam SucceX-E F4 45A ESC 2207 2750KV / 1800KV Motor

Купить iFlight Nazgul5 V2 240mm 5 Inch 4S / 6S Freestyle FPV Racing Drone BNF/PNP Caddx Ratel Cam SucceX-E F4 45A ESC 2207 2750KV / 1800KV Motor
6s Version
4s Version

PRODUCT DESCRIPTION

Nazgul5 V2 is a 5″ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your for GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Specification:

  • SucceX-E F4 45A flight stack
  • XING-E 2207 FPV Motor (6S 1800KV )
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)
SucceX-E F4 Flight controller– MCU:STM32F405- Gyro:MPU6000- Betaflight OSD:YES- Blackbox:8MB- 4X Uarts(1 2 3 6 )- 8 x Dshot/Proshot/Oneshot output- 8 x individual ESC power/ signal pads- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX- VTX telemetry: YES- WS2812 led Strip:YES- Baro:No
– Beeper:YES- Input:2-6S(Max 8S)- BEC:5V/2.5A cont- Firmware target : BETAFLIGHTF4- Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm- Dimensions:36*36mm- Weight:7.6g
SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC– Dimension: 40*43mm- Mounting Holes: 30.5*30.5mm/Φ3mm- Weight: 14.4g- Supports 2-6S Lipo input- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware- Current sensor: YES- BEC: NO- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.- Target: G-H-30 BLS 16.7
SucceX Force 5.8g 800mW VTX Adjustable– Item: SucceX-Force 800mW adjustable VTX- Input voltage:- Output voltage/ Max current: 5V 1A- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@500mW, 380mA@800mW- Output 48 frequency points, – size:36*36*3mm– PIT/25mW/200mW/400mW/800mW

Feature:

– 5mm arm design for more durability

– Easy-Swap arms

– LED illuminated Logo

– XING-E 2207 motors and NAZGUL 5140 props
– 5″ version also fits 5.1″ style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks

Package Included:

  • 1x Nazgul5 V2 240mm 5 Inch 6S FPV Racing Drone
  • 1x Caddx Ratel, 2.1mm lens camera
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Additional Suggested Parts (Not Included)

  • Battery 6S 1300mAh
  • Camera mount for GoPro

FACTORY SETUP and WIRING DIAGRAM:
This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.
Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK