Eachine US65 / DE65 PRO whoop comes with watertransfer craft and a New AIO 4 IN 1 CrazybeeX flight controller. The weight only 24g. High performance 2.0 plug design supporting up to 2S Lipo and 5A continuous current for each ESC. Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera give you a highly view. Simply bind it to your transmitter then you are ready to enjoy your all-new Eachine US65 / DE65 PRO.
Specifications:
Brand Name: Eachine
Item Name: US65PRO DE65PRO
Wheelbase: 65mm
Size: 81mmx81mmx39mm
Weight: 24g(without battery)
Features:
24gram 1-2s brushless 65mm whoop
New AIO 4in1 CrazybeeX flight controller
Smooth and powerful
CADDX ANT Camera
High performance ET2.0 plug
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
External Frsky RXSR receiver version(ACCST D16 sbus output)
External TBS Crossfire Nano receiver version
Flight controller | (Frsky SPI RX version) CRAZYBEEX FR V1.0 FC Firmware target: CrazybeeF4FR(Flysky SPI RX version) CRAZYBEEX FS V1.0 FC Firmware target: CrazybeeF4FS(External Frsky RXSR version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX(External TBS CRSF NANO version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver or no receiver Built-in 5V 1A BEC Built-in voltage detection |
Motor | Mode: NX0802 14000KV Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g):1.7g No.of Cells(Lipo):1-2S |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HE* Default protocol: DSHOT600 |
Propellers | Gemfan 1219-3Center Thickness:5mmProp Disk Diameter:31mmCenter Hole Inner diameter:1.0mm |
Onboard 5.8g VTX | Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready |
Caddx ANT 1200tvl camera | Image Sensor: 1/3″ CMOS SensorHorizontal Resolution: 1200 TVLTV System: NTSC or PAL IMAGE: 16:9 or 4:3Synchronization: InternalElectronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000S/N Ratio : >52dB (AGC OFF)Video Output: CVBSLens: 1.8mmMin. Illumination: 0.001Lux@F1.2Auto Gain Control: YESBLC: YESWDR: Global WDRDNR: 3D DNRDimensions: 14*14mm(with bracket to 19*19mm)Wide Power Input: DC 3.7-18VWork Temperature: -20℃~+60℃Weight: 2g (N.W.) |
Lipo Battery | Capacity:250mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 55mmx12mmx7mm Weight: 6.5gConnector: ET2.0 |
Multi port Lipo/Lihv battery charger | Weight: 41g Dimensions: 82x51x22mm Input: DC 7V-22V Output switchable: Fixed at 200~600 milliamps Cutoff voltage switchable: 4.20v cell charging cutoff (+- 0.5% margin of error) for 1S Lipo Battery 4.35v cell charging cutoff (+- 0.5% margin of error) for 1S 3.8V LIHV Battery |
Onboard Frsky SPI receiver Version | Onboard Frsky SPI D8 receiver Version SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 modelChannels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200mOnboard Flysky SPI receiver VersionSPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe support |
External Frsky R-XSR receiver version | Weight: 1.5gNumber of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)Operating Voltage Range: 3.5V~10VOperating Current:70mA@5VFirmware UpgradableCompatibility: FrSky X Series modules and radios in D16 mode Could support Frsky New ACCESS Protocol ( Upgrade firmware) |
External TBS CRSF Nano receiver version | Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible |
Package Included:
1 x US65 PRO or DE65 PRO Whoop Frame and canopy
1 x Receiver
Option1: CrazybeeX FR V1.0 built-in internal Frsky SPI D8/D16 receiver
Option2: CrazybeeX FS V1.0 built-in internal Flysky SPI receiver
Option3:CrazybeeX PNP V1.0 with External Frsky RXSR receiver
Option4:CrazybeeX PNP V1.0 with External TBS crossfire nano receiver
4 x Eachine NX0802 KV14000 brushless motor
1 x Gemfan 1219-3 Propellers(4cw+4ccw)
1 x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
1 x 5.8G 25mw 40ch vtx (Flight controller built-in)
4 x 1S 250mah 30C LiHV Battery
1 x Multi port LIPO/LIHV Battery Charger with 12V adapter
1 x Screw Driver
1 x Propeller disassemble tool
1 x Eachine Handbag